certified by TÜV

The BATTERYLIFE Activator has been tested and certified by TÜV - Rheinland. The performance of the Activator was verified on a mobile phone battery. Download the certification document (PDF format) here.

batterylife Activator - for used and new rechargeable Li-Ion batteries

The batterylife Activator is easy to install and starts working after 5-10 charging cycles. Remove the battery from the phone. Peel the protective foil from the batterylife Activator and attach the Activator to battery. Re-connect the battery to the mobile phone. (Note: at least 80% of a side of the Li-Ion battery must be covered by the foil! – please refer to the manual) The batterylife Activator is a Japanese invention (with an international patent pending). This unique innovation has been evaluated, documented and certified by TÜV - Rheinland and several prestigious institutions and universities (University of Osaka, University of Kobe, SG Telecom S. Korea und NTT Docomo). It enables longer battery life as well as improved regeneration and utilization of the Li-Ion battery The batterylife Activator 'turboboosts' your Li-Ion battery!

 

For greater efficiency, place the Activator foil – if possible – on the side of your battery, that faces towards the device. Do NOT cover the contacts of your battery. Make sure the surface is clean, and free from dust and grease. The Activator (standard size 50mm x 35mm) must cover at least 80 % of a side of the battery surface. Adjust the size of the foil if needed (see table). Special note for Nokia 6310: Place the Activator flush with the Nokia label to ensure a 80% coverage of the battery.

1. Switch off your device as described in the manual.
2. Remove the battery.
3. Remove the protective film from your batterylife Activator.
4. Attach the Activator to your rechargeable battery.
5. Re-connect the battery to your mobile phone, as described in the manual.
6. Switch on your mobile phone.