The Qflash is a studio quality, high power, TTL flash,
designed with the professional in mind.

The Qflash Model T2 is powered by the Quantum Turbo Battery
for Guide No. 55 (100 asa) auto flash power.
The Qflash Model X2 can be powered by a Lumedyne or
Norman pack, for up to 400 watt-seconds of auto-flash power.

Qflash uses parabolic reflectors for softer, cleaner light.
The reflectors are removable for bare-bulb lighting.
The flash head bounces and swivels.

Flash control is either automatic, TTL (with optional adapters),
manual, or stroboscopic.
Automatic exposure control covers a nine stop range,
adjustable every 1/3 stop,
for a total of 25 automatic settings!

Manual power can be adjusted from full to 1/64 power
in 1/3 stop increments.
Flash power can be precisely what you need.

Stroboscopic mode can be adjusted for flash power,
and number and frequency of bursts.

- Studio quality reflectors -

To avoid harshness that can be produced by rectangular reflectors,
Qflash uses a parabolic reflector.
Angles of coverage : Normal position 55°, Wideangle 70°, with diffuser (included) 90°,
or remove the reflector for bare-bulb 360° coverage.

- Accurate auto ranges -

LCD shows minimum & maximum flash distance range for each auto setting.
Qflash has both an audible and visual indication of correct exposure,
displaying "OK" & beeping once.
Or you get three beeps right away and an "UNDR" or "OVER" in the display,
telling which way to adjust the Qflash.
The beeping can be turned off, or you may use the included earphone.

- TTL Mode -

With Quantum's optional adapters for popular TTL cameras,
you can control the Qflash exposure through-the-lens.
TTL operation indicates over and under exposure visually and audibly.

- Slave Mode -
(for most flexible lighting setups)

One Qflash can control the exposure of an unlimited number
of Qflash "slaves" connected to it.
Use this feature to increase lighting power,
or light diffucult subjects the way you want with multiple flash heads.
They can be controlled via a TTL adapter or their own auto setting.
You can also set each Qflash independently,
to its own automatic, manual, or stroboscopic exposure
to get precise lighting ratios and light control.

- Stroboscopic Mode -

Lets you select a strobe rate of one to 50 flashes / second.
You can also select the power level
and the total number of flashes from one to 20.
(The number of bursts that can be set depends on the power level setting).

- Remote Sensor -

This accessory lets you put Qflash where you want
and read the light at the camera position.
Placement of Qflash can be up to 100' away
(cable extensions required).

- Lighted LCD -

The lighted LCD panel shows Mode (Program, Automatic, Manual,
TTL, Slave, Reflector Position, or Stroboscopic),
F#, flash distance range, Guide #, ISO, flash ready,
and Under as well as Over exposure checks.
The Qflash controls are intuitive and easy to learn in minutes.
Readouts can be converted between English and metric units.

- Program Mode -

We have added this new mode
to let you program up to four of your favorite settings.
You can then switch between them with a button push.
For example, instantly switch from f/16 @ 3.5m. manual to f/8 (1-7m.) automatic to TTL!
Set any combinations you like!

- Enhanced Manual Mode -

An enhanced LCD display now shows f/stop and distance
to help you choose the manual power level you want.
The Manual Mode also displays the relative manual setting,
and it calculates the Guide No. for you.

- Options Display -

Pushing the Options button opens a display.
Set the reflector indicator to Normal, Wide, or Diffuser
so that all Qflash distance readouts are calibrated
to the selected reflector position.
You can also turn the audible indicator on or off,
and change between English and Metric readouts
for Guide No., film speed, and distance.

- Infinite Memory -

When you program your most frequently used mode, f/stop, film speed,
and other settings into Qflash model T2 or X2,
they retain these settings until you change them.
Even after shutting off the power indefinitely.

Adapts QFX/QFX2 to work with Norman 200B or 200C.

Adapts QFX/QFX2 to work with Norman 400B.

Adapts QFX/QFX2 to work with Lumedyne power packs.

Extends power cable for model QFX/QFX2. 16 foot (5 meters) long.
Warning : Do not use other manufacturer's power cables - you will damage the QFlash.

Dual power connector for powering two QFlash model T/T2's with one Turbo Battery.

QFlash Model T/T2 Extension Cord, 10 foot (3 meters) for extending Turbo power cable.

Control Cable. To slave two QFlashes together. 20 foot (6 meters) long.

Control Extension Cable. Male to Female, 20 foot (6 meters) long.
To extend QF21, QF50, QF52, QF53, or TTL adapters.
Maximum control length possible is 100 foot (30 meters) using 5 QF51 cables.

'Y' Connector Module. Needed for the third QFlash connected, and each one thereafter.
Also required for a TTL adapter or remote Sensor when used with 2 or more QFlashes.

Hot Shoe Sync Adapter. Syncs QFlash via the hot shoe on a camera.

Sync Cord, coiled, 18 inches (.5 meters) long, PC to Household male plug.

Sync Cord, coiled, 5 foot (1.5 meters) long, PC to Household male plug.