Studio Quality,  High Power, TTL Flash. Designed with the professional in mind.

The Qflash Model T2 is powered by the Quantum Turbo or Turbo Z Battery for Guide No. 160 (ISO 100) auto flash power. The Qflash Model X2 can be powered by the new Qpaq-X. It can also be powered by a Lumedyne or Norman pack, for up to 400 watt-seconds (GN 220, ISO 100 film) of auto-flash power. 

Qflash uses parabolic reflectors for softer, cleaner light. The reflectors are removable for bare-bulb lighting. The flash head bounces and swivels. Flash control is either automatic, TTL (with optional adapters), manual, or stroboscopic. Automatic exposure control covers a nine stop range, adjustable every 1/3 stop, for a total of 25 automatic settings! Manual power can be adjusted from full to 1/64 power in 1/3 stop increments. Flash power can be precisely what you need. Stroboscopic mode can be adjusted for flash power, and number and frequency of bursts. Program lets you store up to 4 of your favorite settings (e.g. auto @ f8, f16 manual @ 1/4 power) and switch between them at a push of a button.

Qflashes can be ganged together to produce flexible lighting setups with thousands of watt-seconds of automatic or manual flash power. Qflash mounts on a camera bracket, tripod, or lightstand and weighs no more than a conventional flash.

Studio quality reflectors - To avoid harshness that can be produced by rectangular reflectors, Qflash uses a parabolic reflector. Angles of coverage : Normal position 55°, Wideangle 70°, with diffuser (included) 90°, or remove the reflector for bare-bulb 360° coverage.

Accurate auto ranges - LCD shows minimum & maximum flash distance range for each auto setting. Qflash has both an audible and visual indication of correct exposure, displaying "OK" & beeping once. Or you get three beeps right away and an "UNDR" or "OVER" in the display, telling which way to adjust the Qflash. The beeping can be turned off, or you may use the included earphone.

TTL Mode - With Quantum's optional adapters for popular TTL cameras, you can control the Qflash exposure through-the-lens. TTL operation indicates proper and over and under exposure visually and audibly.

Slave Mode (for most flexible lighting setups) - One Qflash can control the exposure of an unlimited number of Qflash "slaves" connected to it. Use this feature to increase lighting power, or light difficult subjects the way you want with multiple flash heads. They can be controlled via a TTL adapter or their own auto setting. You can also set each Qflash independently - to its own automatic, manual, or stroboscopic exposure to get precise lighting ratios and light control.

Stroboscopic Mode - lets you select a strobe rate of one to 50 flashes per second. You can also select the power level and the total number of flashes from one to 20.
(The number of bursts that can be set depends on the power level setting).

Remote Sensor - This accessory lets you put Qflash where you want and read the light at the camera position. Placement of Qflash can be up to 100' away (cable extensions required).

Lighted LCD - The lighted LCD panel shows Mode (Program, Automatic, Manual, TTL, Slave, Reflector Position, or Stroboscopic), F#, flash distance range, Guide #, ISO, flash ready, "OK", and Under as well as Over exposure checks. The Qflash controls are intuitive and easy to learn in minutes. Readouts can be converted between feet or meters.

Modeling light for Qflash model X2 - A 35 watt modeling lamp for this model lies inside the flashtube at the focal point. It provides an illumination pattern true to the flash pattern, and also serves as a focusing aid.

Program Mode - Lets you program up to four of your favorite settings. You can then switch between them with a button push. For example, instantly switch from f/16 @ 10ft. manual to f/8 (2.2-20ft.) automatic to TTL! Set any combinations you like!

Enhanced Manual Mode - An enhanced LCD display shows f/stop and distance to help you choose the manual power level you want. The Manual Mode also displays the relative manual setting, and it calculates the Guide No. for you.

Options Display - Pushing the Options button opens a display. Set the reflector indicator to Normal, Wide, or Diffuser so that all Qflash distance readouts are calibrated to the selected reflector position. You can also turn the audible indicator on or off, and change between Feet and Meters readouts for Guide No., film speed, and distance.

Infinite Memory - When you program your most frequently used mode, f/stop, film speed, and other settings into Qflash model T2 or X2, they retain these settings until you change them. Even after shutting off the power indefinitely.

Accessories

QF21	Remote Sensor. Shoe Mount with Live Sync Contacts.
QF30	Replacement Flashtube for QFlash model T/T2.
QF30uv	Optional UV Coated Tube for QFlash model T/T2.
QF32	Replacement Flashtube for QFlash model X/X2.
QF32uv	Optional UV Coated Tube for QFlash model X/X2.
QF33	Replacement Modeling Lamp for QFlash model X/X2.
QF60	Spare Reflector.
QF61	'Snoot' for Pinpoint Lighting.
QF62S	Matte Silver Bare Bulb Enhancer.
QF62G	Light Gold Bare Bulb Enhancer.
QF63	Telephoto Reflector with QF63S Spacer.
QF63S	Flashtube Spacer for QF63.
QF67A	Wide Angle Diffuser.
QF64	Diffusing UV Filter Kit for QFlash.
QF65	Clear UV Filter Kit for QFlash.
QF66	7 assorted Hi-Temp Color Gels pre-cut for QFlash.
QF70	Quick Release 'L' Bracket.
QF72	Multi-Bracket
QF73	"L" Bar

Control Cables

QF50	Control Cable. To slave two QFlashes together. 20 foot (6 meters) long.
QF51	Control Extension Cable. Male to Female. 20 foot (6 meters) long. To extend QF21, QF50, QF52, QF53, or TTL adapters. Maximum control length possible is 100 foot (30 meters) using 5 QF51 cables.
QF52	'Y' Connector Module. Needed for the third QFlash connected, and each one thereafter. Also required for a TTL adapter or remote sensor when used with 2 or more QFlashes.
QF53	Hot Shoe Sync Adapter. Syncs QFlash via the hot shoe on a camera.
536	Sync Cord, coiled, 18 inches (.5 meters) long. PC to Household male plug.
537	Sync Cord, coiled, 5 foot (1.5 meters) long. PC to Household male plug.
540	Household to Household straight cord. Use when the Qflash is connected to the camera with a TTL adapter. Enables photographer to fire a remote flash with the Quantum Radio Slave 4 & 4i.
541	Household to Mini-Phone Jack. Use when the Qflash is connected to the camera with a TTL adapter. Enables photographer to fire a remote flash with the Quantum Radio Slave 2.

Power Cables

QF40	Adapts QFX/QFX2 to work with Norman 200B or 200C.
QF41	Adapts QFX/QFX2 to work with Norman 400B.
QF42	Adapts QFX/QFX2 to work with Lumedyne power packs.
QF43	Extends power cable for model QFX/QFX2. 16 foot (5 meters) long. Warning : Do not use other manufacturer's power cables ! You will damage the QFlash.
QT48	Dual power connector for powering two QFlash model T/T2's with one Turbo Battery.
QT49	QFlash Model T/T2 Extension Cord. 10 foot (3 meters) for extending Turbo power cable.

Remote Sensor

QF21	Shoe mount with live sync contact.
Note: If a Remote Sensor is used in a multi-QFlash set up, a QF52 'Y' connector is required for the QF21.

TTL Adapters

Note: If a TTL adapter is used in a multi-QFlash set up, a QF52 'Y' connector is required for the TTL adapter.
Camera Type		Model #
Bronica	ETRsi, SQAi	QF20
Canon	EOS-3, A2E, A2, A5, 1, 1n, 1n RS, 10, 10S, 600, 620, 630, 650, 700, 750, 850, 1000, 1000F, Rebel, Rebel_S, RT, T90, Elan, Elan2, Elan2e	QF13N
Contax	RTSII, RTSIII, MD137, MA137, 139, 159MM, 167MT, 645, G1, G2 645	QF15 QF24
Hasselblad	201F, 202FA, 203FE, 205FCC, 205TCC, 500ELX, 503CX, 503CXI, 503CW, 553ELX, 555ELD	QF19
Leica	R5, RE, R6, R6-2, R7 R8	QF16 QF23
Mamiya	645 Pro TL 645AF	QF22 QF25
Minolta X	X700, X500, X570, CLE Maxxum-5000, 7000, 9000	QF11
Minolta Xi	Dynax & Maxxum - 3000i, 3700i, 5000i, 700i, 7000i, 8000i, 8700i, 3xi, 5xi, 7xi, 9xi, SPxi	QF14
Nikon	FA, FG, FE2, F100, F301, F4, F4S, F401, F401S, F5, F501, F601, F601M, F801, N2000, N2020, N4004, N6000, N6006, N8008, N8008S, N90, N90S D1 (manual or auto mode only - no TTL capabilities)	QF12
Olympus	OM-2, 2N, 2SP, 4, 40, 707, 77AF, 88, 101	QF10
Pentax	SFX, SFXn, SF1, SF1n, SF7, SF10, Z1, PZ1, Z10, PZ10, LX_(with_finder_shoe), SUPER A, 645, 645N	QF17
Practica	BX20	QF10
Rollei	SL2000f, 3001, 3003, SL66e, SL66x, SL66se, SL6006, 6002, 6003, 6008, 6008i, 2.8GX	QF18